HGLRC Rekon7 LR 7″ FPV okvir dugog dometa 324 mm 3K karbonska vlakna

profesionalni 7-inčni okvir za FPV dugog dometa s konstrukcijom od 3k karbonskih vlakana

Hglrc Rekon7 LR je vrhunski 7-inčni okvir za FPV dugog dometa dizajniran za dulje vrijeme leta i HD digitalne FPV sustave. Izrađen od visokočvrstih 3K karbonskih vlakana s rukama debljine 6 mm, međuosovinskim razmakom od 324 mm i sveobuhvatnim mogućnostima montaže za DJI O3, Air Unit i GoPro kamere, ovaj okvir pruža iznimnu izdržljivost i svestranost za istraživanje na duge udaljenosti i filmske letove.

ključne značajke

• Dizajn dugog dometa od 7 inča – međuosovinski razmak od 324 mm optimiziran za dulje vrijeme leta
• 3k konstrukcija od karbonskih vlakana – visokočvrsti, lagani materijal
• Ručke debljine 6 mm – maksimalna izdržljivost i krutost pri udaru
• Kompatibilno s DJI O3/Air uređajima – uključeni su namjenski TPU nosači
• GoPro nosač uključen – TPU držač za montažu akcijske kamere
• dvostruka montaža motora – uzorci 16×16 mm i 19×19 mm
• 20×20 mm FC montaža – kompatibilnost sa standardnim kontrolerom leta
• kompletan set hardvera – svi vijci, odstojnici i TPU dijelovi uključeni
• šipke za ojačanje ruku – 4 mm karbonska vlakna za dodatnu čvrstoću
• sveobuhvatna TPU oprema – GPS, antena, zujalica i nosači za kameru

savršeno za

• istraživanje FPV-om na velike udaljenosti
• kinematografsko snimanje iz zraka
• HD digitalni FPV s DJI O3/Air jedinicom
• produženo vrijeme leta
• freestyle opremljen GoPro kamerom
• 7-inčna utrka i krstarenje

tehničke specifikacije

dimenzije okvira

• model: komplet okvira rekon7 lr
• tip: 7-inčni dugog dometa
• materijal: 3k karbonska vlakna
• međuosovinski razmak: 324 mm
• ukupna veličina: 337 × 246 mm
• težina: otprilike 200-250 g (samo okvir)

specifikacije ploča

• debljina gornje ploče: 2 mm
• debljina donje ploče: 2 mm
• debljina srednje ploče: 2 mm
• debljina prednje ruke: 6 mm
• debljina stražnje ruke: 6 mm
• Zaštitna letvica okvira: 2 mm
• bočna ploča kamere: 2 mm
• šipka za ojačanje ruke: 4 mm

uzorci za montažu

• kontroler leta: 20×20 mm
• nosač kamere: 19×19 mm / 20×20 mm
• montaža motora: 16×16 mm / 19×19 mm
• Razmak gornje/srednje ploče: 20 mm

preporučene komponente

• kontroler leta: zeus f722 ili sličan (20×20 mm)
• motori: veličina 2806.5 (montaža 16×16 mm ili 19×19 mm)
• esc: zeus 48-60a ili slično
• kamera: FPV kamere 19×19 mm ili 20×20 mm
• propeleri: 7 inča
• Baterija: 6s 1800-4200mah lipo

što je uključeno

carbon fiber parts

• 1× 2mm top plate
• 1× 2mm base plate
• 1× 2mm mid plate
• 2× 6mm front arms
• 2× 6mm rear arms
• 2× 2mm frame protection boards
• 2× 2mm camera side panels
• 2× 4mm arm reinforcement rods

aluminum standoffs

• 2× m3×28mm black aluminum columns
• 4× m3×20mm black aluminum columns
• 2× m3×18mm black aluminum pillars

hardware & fasteners

• 4× m4×12 screws
• 4× m3×20 screws
• 4× m3×16 screws
• 4× m3×10 screws
• 8× m3×8 screws
• 4× m2×20 screws
• 1× m2×16 screws
• 1× m2×10 screws
• 2× m2×4 screws
• 1× m5 lock nut (red)
• 4× m3 self-locking nuts
• 5× m2 self-locking nuts
• 8× m3×8 shock-absorption balls
• 4× m2×4 shock-absorption balls

tpu accessories (black)

• 1× gopro holder mount
• 1× gps mount
• 1× antenna mount
• 1× t-antenna mount
• 1× buzzer mount
• 1× dji air unit block a
• 1× dji air unit block b
• 1× dji o3 holder mount
• 1× camera converting seat

additional accessories

• 2× battery straps (20×250mm)
• 1× battery anti-slip pad

advanced features

6mm thick carbon fiber arms

the extra-thick 6mm carbon fiber arms provide exceptional rigidity and crash durability, ensuring your frame can withstand hard impacts during long-range flights while maintaining structural integrity.

long-range optimized design

the 324mm wheelbase and 7-inch propeller compatibility deliver optimal efficiency for extended flight times, making this frame perfect for long-range exploration and cinematic missions.

dji digital fpv ready

includes dedicated tpu mounts for dji air unit and dji o3 systems, providing secure mounting and protection for your digital fpv equipment with easy installation.

dual motor mounting options

supports both 16×16mm and 19×19mm motor mounting patterns, giving you flexibility to use a wide range of motors optimized for long-range efficiency or high performance.

comprehensive protection

features 2mm camera side panels, frame protection boards, and 4mm arm reinforcement rods for maximum durability and component protection during crashes and hard landings.

complete tpu accessory kit

includes all necessary tpu mounts for gopro, gps, antennas, buzzer, and dji digital systems, eliminating the need for additional 3d printing or custom fabrication.

build compatibility

• digital fpv systems: dji o3, dji air unit, analog fpv cameras (19mm/20mm)
• flight controllers: 20×20mm mounting pattern
• motors: 16×16mm or 19×19mm mounting (2806.5, 2807, 2808 size)
• propellers: 7-inch
• batteries: 6s 1800-4200mah lipo
• action cameras: gopro (tpu mount included)
• gps: standard gps modules (tpu mount included)

important notes

• frame kit only – electronics and motors not included
• 3k carbon fiber construction for strength and light weight
• 324mm wheelbase for 7-inch propellers
• 6mm thick arms for maximum durability
• complete hardware kit with all screws and standoffs
• comprehensive tpu accessory package included
• dji o3 and air unit compatible
• gopro mount included
• dual motor mounting patterns (16×16mm / 19×19mm)
• 20×20mm flight controller mounting
• recommended for 6s 1800-4200mah batteries
• arm reinforcement rods included for added strength
• shock-absorption balls included for vibration damping
• battery straps and anti-slip pad included
• recommended for ages 14+