Punjač GEPRC WooPower W63 1S

WooPower W63 je naš prvi 1S punjač sa šest neovisnih priključaka, što omogućuje istovremeno punjenje, pražnjenje i pohranu bez smetnji.

S podrškom za punjenje do 3,0 A po kanalu, osigurava dulje vrijeme leta, dok se svaki kanal može prazniti pri 0,5 A. Višestruke sigurnosne značajke pružaju bezbrižnost tijekom korištenja.

IPS zaslon nudi jasne, živopisne vizualne prikaze, a intuitivni dizajn gumba olakšava rukovanje. Njegova kompaktna i lagana konstrukcija od 160 g čini ga izuzetno prenosivim.

značajka

1. šest neovisnih priključaka za punjenje, pražnjenje i pohranu bez smetnji.
2. Svih šest priključaka podržava istovremeno punjenje do 3A, što omogućuje dulje vrijeme leta.
3.  Svaki kanal može isprazniti do 0,5 A, što skladištenje baterije čini jednostavnim.
4.  xt60 (lipo 3-6s baterija) s ulazom 7-26v.
5.  brzo punjenje tipa C (podržava pd3.0 i novije punjače/power bank uređaje, preporučuje se pd3.0).
6.  kompatibilan s ph2.0 i BT2.0 konektorima (radi s A30).
7.  1,54-inčni IPS zaslon pruža jasne, lako čitljive informacije i jednostavne kontrole za bolje korisničko iskustvo.
8.  kompaktan i lagan sa samo 160 g, savršen za korištenje u pokretu.
9.  Veliki hladnjak i ventilator za hlađenje osiguravaju učinkovito odvođenje topline i produžuju vijek trajanja.
10.  Podržava LiPo, LiHV i Life 1S baterije za jednostavno prebacivanje. Širok raspon napona, kompatibilan s drugim baterijama.
11. five safety features, including temperature, time, capacity, and short-circuit protection, ensure performance and safety.

specification

• dimension: 125 x 61 x 28mm
• weight: 160g
• output connector: ph2.0/bt2.0(compatible with a30)
• input connector: xt60/type-c(pd3.0)
• screen size: 1.54-inch ips display screen 240*240 resolution
• min input power: 100w (at max charger load)
• max output power: 78w
• max charging current: 3.0a x 6
• max discharging current: 0.5ax 6
• input voltage range: 7-26v
• operating temperature: 0°c-75°c
• battery types: lipo / lihv / life 1s
• functions: charge / discharge / storage

instructions

1.  never leave the charger unattended. stop using it immediately if any issues arise and consult the manual or technical support.
2. keep the charger away from dust, sand, moisture, rain, high temperatures, direct sunlight, and heavy vibrations.
3.  ensure the power supply voltage is within the 7-26v range. do not connect both xt60 and type-c connectors simultaneously.
4.  avoid using bt2.0 and ph2.0 on the same port for charging or discharging.
5.  remove all batteries from the charger before restarting.
6.  reinserting the type-c connector too soon may prevent the charger from starting. wait about 8 seconds before plugging it back in.
7.  place the charger on a heat-resistant, non-flammable, and insulated surface. avoid using it on car seats, carpets, cardboard boxes, or similar surfaces. keep liquids and metal particles
8. away from the input ports and vents, and ensure flammable or explosive materials are not nearby.
9. do not use the charger in high-temperature environments, and keep the bottom ventilation clear to ensure proper airflow.
10. ensure you understand the battery’s specs and set the charger parameters correctly to avoid damage or dangerous situations like fires or explosions.
11.  remove the battery promptly after charging or discharging.

include

w63 charger x1

type-c to c charging cable x1

user manual x1