Napomena! Specifikacije svake vrste su različite, molimo pažljivo pogledajte

Taker F722BLS 60A V2 Stack.

značajke

1. koristite mainstream stm32f722 čip

2. opremljen najnovijim 42688-p žiroskopom 

3. Skladište crne kutije od 16 m

4. integrirani LC filter

5. nadogradnja USB sučelja tipa C

6. izravno uključen u D-JI Air jedinicu

7. S Taker h60_bls 60a 4in1 regulatorom, osjećaj letenja je svilenkast

8. Jednostavna i razumna metoda instalacije, amortizer može učiniti da žiroskop radi vrlo stabilno

9. 9v@2.5a + 5v@3a dvostruki neovisni bec

tehnički podaci

gep-f722-hd v2 kontroler leta

• mikrokontroler: stm32f722

• imu: icm42688-p(spi)

• Priključak zračne jedinice: izravno uključivanje u D-JI zračnu jedinicu

• crna kutija: 16 m na brodu

• USB konektor: tip-c

• OSD: betaflight OSD s čipom AT7456E

• bec: 5v@3a, 9v@2.5a dvostruki bec

• Cilj firmvera: geprcf722

• veličina: 36,85×36,85mm, rupa 30,5×30,5mm, rupa φ4mm postaje φ3mm nakon korištenja silikonskog kruga za apsorpciju udaraca.

• ulazni napon: 3-6s lipo

• UART:5

• filter snage: integrirani LC filter

• težina: 8,1 g

Taker h60_bls 60a 4u1 esc

• ulazni napon: 3-6s lipo

• galvanometar: podrška

• kontinuirana struja: 60a

• struja udara: 65a (5 sekundi)

• protokol podrške: dshot 150/300/600

• veličina: 42×45,7 mm, rupa 30,5×30,5 mm, rupa φ4 mm postaje φ3 mm nakon korištenja silikonskog prstena za apsorpciju udaraca.

• težina: 14,9 g

• cilj: b_x_30

uključuje

1 x regulator leta

1 x ESC

1 x kondenzator

1 xD JI adapter kabel zračne jedinice

1 x adapter kabel regulatora leta

1 x XT60 kabel za napajanje

4 x M3*30 vijaka

4 x M3*25 vijaka

8 x najlonskih matica

8 x silikonskih ušica

2 x SH1.0 4-pinski silikonski kabel

1 x kabel za spajanje kamere

Taker f722bls 65a v2 paket

značajke

1. koristi glavni stm32f722 čip

2. equipped with the latest 42688-p gyroscope

3. 16m onboard black box storage

4. integrated lc filter

5. upgraded type-c usb interface

6. directly plugs into the d ji air unit

7. paired with the taker h65_8s_bls 65a 4in1 esc, providing a smooth flying experience

8. simple and efficient installation method with shock absorbers for stable gyroscope performance

9. dual independent becs: 9v@2.5a and 5v@3a

specifications

gep-f722-hd v2 flight controller

• mcu: stm32f722

• imu: icm42688-p(spi)

• air unit connection:direct plugging into d ji air unit

• black box: 16m onboard

• usb interface: type-c 

• barometer: supported

• osd: betaflight osd w/ at7456e chip

• bec: 5v@3a,9v@2.5a dual bec

• firmware target: geprcf722

• dimension: 36.85×36.85mm, mounting hole size 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

• input voltage: 3-6s lipo 

• uart: 5

• power filter: integrated lc filter

• weight: 8.1g

taker h65_8s_bls 65a 4in1 esc

• input voltage: 3-8s lipo

• ammeter: supported

• continuous current：65a

• burst current：70a（5 seconds）

• support protocol: dshot 150/300/600

• dimension：42×45.7mm,mounting hole size30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

• weight: 14.9g

• firmware target: b_x_30

includes

1 x fc board

1 x esc board

1 x capacitor

1 x d ji air unit adapter cable

1 x flight controller adapter cable

1 x xt60 power cable

4 x m3*30 screws

4 x m3*25 screws

8 x nylon nuts

8 x silicone anti-shake pads

2 x sh1.0 4pin silicone cable

1 x camera connection cable


 

taker f722bls 80a v2 stack

features

1.  use mainstream stm32f722 chip

2.  equipped with the latest 42688-p gyroscope 

3.  16m black box storage

4.  integrated lc filter

5.  upgrade type-c usb interface

6.  directly plugged into the d ji air unit

7.  with taker h80_bls 80a 4in1 esc, dual mos, high current, silky flight

8.  simple and reasonable installation method, the shock absorber can make the gyroscope work very stably

9.  9v@2.5a + 5v@3a dual independent bec

specifications

gep-f722-hd v2 flight controller

•  mcu:stm32f722

•  imu:icm42688-p(spi)

•  air unit connection:direct plugging into d ji air unit

•  black box:16m onboard

• usb interface:type-c 

• barometer: support

• osd:betaflight osd w/ at7456e chip

• bec:5v@3a,9v@2.5a dual bec

• firmware target:geprcf722

• size:36.85×36.85mm, hole 30.5×30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

• input voltage:3-6s lipo 

• uart:5

• power filter:integrated lc filter

• weight:8.1g

taker h80_bls 80a 4in1 esc

•  input voltage: 3-6s lipo

•  ammeter: support

•  continue current:80a

•  burst current:85a(5 second)

•  support protocol: dshot 150/300/600

•  size:56.3*61.1mm,hole30.5×30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

•  weight: 28.1g

• target: b_x_30

includes

1 x flight controller

1 x esc

1 x capacitor

1 x d ji air unit adapter cable

1 x flight controller adapter cable

1 x xt60 power cable

4 x m3*30 screws

4 x m3*25 screws

8 x nylon nuts

8 x silicone grommets

2 x sh1.0 4pinsilicone cable

1 x camera connection cable